Porous Ceramic Disc

By -

The range of Innovcera porous ceramic filters is made from aluminum oxide and silicon carbide. The strong, uniform porous ceramic has 40-50% open porosity with a tortuous pore structure and is available in pore sizes ranging from 1 to 100 microns.

Maximum Temperature
Up to 1000C for porous ceramic, limited only by sealants, gaskets and/or hardware materials.

Corrosion Resistance
Porous ceramics are resistant to most acids, except for Hydrofluoric Acid and Phosphoric Acid. In alkaline solutions, porous ceramics are resistant up to pH9. It is also resistant to organic solvents. The sealants, gaskets and/or hardware materials used, may be the limiting factor in certain fluids.

Cleanability
Porous ceramic is cleanable by a variety of methods, depending on the type of contaminant to be removed. Methods include spraying, brushing, backwashing, oven firing, dilute acid cleaning, solvent cleaning, steam cleaning and ultrasonic cleaning.

Porous ceramics are used for:

  • Ceramic Vacuum Chucks
  • Ceramic Filters
  • Ceramic Diffusers
  • Ceramic Air Bearings
  • Ceramic Permeable Substrates
  • Ceramic Dispersion Media
  • Ceramic Ash Handling
  • Ceramic Wicking Media
  • Ceramic Fluidized Bed Plates
  • Ceramic Specialty Spargers
  • Ceramic Breathers – Vents

Porous ceramics are used where uniform controlled pore size is required in chemical process, semiconductor, pharmaceutical, and manufacturing applications.

Comments

Post a Comment

Popular posts from this blog

Silicon Nitride Heater

By -
Image
Source: https://www.innovacera.com/news/silicon-nitride-ceramic-heater.html Silicon Nitride Heater has the properties of high-temperature resistance, rapid speed-up, high thermal conductivity, which makes it widely apply for parking heater, heating element for central heating system, spark sensor, etc. Silicon Nitride Heater Features: High-temperature resistance Excellent thermal conductivity Rapid heating-up speed and high working temperature Good startup performance at low temperature, can be start-up at -30℃ Wide applications: high-speed diesel, high-temperature ignition device, ignition for oil medium, gas, burner, Preheater, etc. Application Mold heater Packaging Machinery Tobacco equipment Industrial equipment heating Burner ignition system Petrochemical industry Various high-temperature ignition devices
Read more

What makes the ceramic heating element the core part of a Vaporizer?

By -
Image
Source: https://www.innovacera.com/news/ceramic-heater-coil-for-vaporizer.html Not every dry herb vaporizers are the same! Especially those used ceramic heating element. The ceramic heating element is a safety and healthiest option for dry herb vaporizers, so every vaper is preferred to choose those vaporizers that carry ceramic heating element. The proponents believe that the heating element is the core of the vaporizer and primarily dictates the experience of the taste. Let's more specific, when a vaper burns tobacco, marijuana, or hemp during traditional smoking to release the active component, whatever it's nicotine, CBD, or THC, they inhale the smoke. We all know that's not good for health. Rather than burning, Vaporizer heats the liquid, wax or even dry herb to release a vapour, and a vaper inhales the vapour without any damage to their lungs or throat. And why the ceramic heating element is becoming the core part of the vaporizer? It's mainly because: 1. Ceramic
Read more

Machinable Aluminum Nitride BAN

By -
Image
BAN combines  Aluminum Nitride with Boron Nitride , a hybrid machinable Aluminum Nitride ceramic with excellent thermal conductivity, high strength, and resistance to thermal shock. Innovacera provides BAN, and it has very similar properties to SHAPAL material. SHAPAL is a trademark of Tokuyama Corporation.   These ceramics are used in various industries, including electronics, semiconductor manufacturing, aerospace, automotive and medical. BAN ceramics have properties that make them suitable for applications such as  heat sinks , heater substrates, semiconductor processing components, and optical equipment.   Material Advantages : High mechanical strength. High thermal conductivity. Low thermal expansion. Low dielectric loss. Excellent electrical insulation. High corrosion resistance–non-wetted by molten metals. Excellent Machinabilit–BAN can be machined to high-precision complex shapes. It has excellent sealing ability to vacuum and hasn’t given off much gas. High-frequency wave prop
Read more