How to process the porous ceramic disc and points for attention?

By -

Alumina And Silicon Carbide Porous Ceramic Discs And Plates

Innovacera have more than 7 years experience in producing porous ceramic part for vacuum chuck, filters, air bearings for semiconductor and pharmaceutical industry.

The range of Innovacera porous ceramic filters is made from aluminum oxide and silicon carbide. The strong, uniform porous ceramic has 40-50% open porosity with a tortuous pore structure and is available in pore sizes ranging from 1 to 100 microns. Monolithic, single grade, aluminum oxide porous ceramic is available in 6, 15, 30, 50, 60, and 100 microns pore sizes.

The porous ceramic disc processing is not the same as other ceramics, such as alumina ceramic, zirconia ceramics because of its properties of pores, so when you process the porous ceramics disc, here are 4 points you need to pay attention to:

  1. Put the porous ceramic plate into the water for five minutes.
  2. Ensure the porous plate be full of water to avoid oil contamination permeate into pores.
  3. Cut the plate with the blade only, and then grind it with a grinding wheel or grinding head.
  4. Do not use oil coolant for the machine, or it will be tough to clean.
  5. Clean the plate with neutral detergent by ultrasonic.
  6. Dry by airing or electric fan, and then baking under 100℃ for dead dry.

If you have any problems or inquiries about porous ceramics, welcome to contact us.

Comments

Post a Comment

Popular posts from this blog

Silicon Nitride Heater

By -
Image
Source: https://www.innovacera.com/news/silicon-nitride-ceramic-heater.html Silicon Nitride Heater has the properties of high-temperature resistance, rapid speed-up, high thermal conductivity, which makes it widely apply for parking heater, heating element for central heating system, spark sensor, etc. Silicon Nitride Heater Features: High-temperature resistance Excellent thermal conductivity Rapid heating-up speed and high working temperature Good startup performance at low temperature, can be start-up at -30℃ Wide applications: high-speed diesel, high-temperature ignition device, ignition for oil medium, gas, burner, Preheater, etc. Application Mold heater Packaging Machinery Tobacco equipment Industrial equipment heating Burner ignition system Petrochemical industry Various high-temperature ignition devices
Read more

What makes the ceramic heating element the core part of a Vaporizer?

By -
Image
Source: https://www.innovacera.com/news/ceramic-heater-coil-for-vaporizer.html Not every dry herb vaporizers are the same! Especially those used ceramic heating element. The ceramic heating element is a safety and healthiest option for dry herb vaporizers, so every vaper is preferred to choose those vaporizers that carry ceramic heating element. The proponents believe that the heating element is the core of the vaporizer and primarily dictates the experience of the taste. Let's more specific, when a vaper burns tobacco, marijuana, or hemp during traditional smoking to release the active component, whatever it's nicotine, CBD, or THC, they inhale the smoke. We all know that's not good for health. Rather than burning, Vaporizer heats the liquid, wax or even dry herb to release a vapour, and a vaper inhales the vapour without any damage to their lungs or throat. And why the ceramic heating element is becoming the core part of the vaporizer? It's mainly because: 1. Ceramic
Read more

Machinable Aluminum Nitride BAN

By -
Image
BAN combines  Aluminum Nitride with Boron Nitride , a hybrid machinable Aluminum Nitride ceramic with excellent thermal conductivity, high strength, and resistance to thermal shock. Innovacera provides BAN, and it has very similar properties to SHAPAL material. SHAPAL is a trademark of Tokuyama Corporation.   These ceramics are used in various industries, including electronics, semiconductor manufacturing, aerospace, automotive and medical. BAN ceramics have properties that make them suitable for applications such as  heat sinks , heater substrates, semiconductor processing components, and optical equipment.   Material Advantages : High mechanical strength. High thermal conductivity. Low thermal expansion. Low dielectric loss. Excellent electrical insulation. High corrosion resistance–non-wetted by molten metals. Excellent Machinabilit–BAN can be machined to high-precision complex shapes. It has excellent sealing ability to vacuum and hasn’t given off much gas. High-frequency wave prop
Read more