Ceramic Orifice Plates: A Key Vacuum Interface Component in Mass Spectrometers

By -

Ceramic Orifice Plate and Ceramic to metal sealing


Mass spectrometers work under highly controlled vacuum conditions. One of the biggest engineering challenges is managing the transition between different pressure zones inside the system. This part may look simple, but in actual mass spectrometer systems, it does a lot of the heavy lifting. Even a small issue around the orifice area can affect vacuum performance, ion transmission, or signal stability. For many engineers, the interface section is one of the places that usually needs the most attention during system design.

 

A ceramic orifice plate is a ceramic-to-metal sealing component typically installed between the ion source and the mass analyzer. Its main function is to allow ions to pass through while restricting gas flow between vacuum chambers. This helps create the differential vacuum environment required in mass spectrometry systems.

 

The structure usually consists of a high-purity ceramic disc and a metal flange. The ceramic section contains one or more precision micro-holes used for ion transmission. 

 

Most suppliers use high-purity alumina for the ceramic side. The material is stable, electrically insulating, and holds up well in vacuum environments. For the metal flange, Kovar is a common option, especially when thermal expansion matching is critical. Some systems may also use stainless steel depending on the operating conditions and assembly structure.

 

One critical factor during manufacturing is thermal expansion matching between ceramic and metal. If the expansion rates are not properly controlled, cracking or vacuum leakage may occur during thermal cycling.

 

To achieve reliable sealing performance, active brazing technology is widely used. The brazing alloy typically contains active elements such as silver, and copper. Under high-temperature vacuum conditions, these materials react with both the ceramic and metal surfaces to form a strong hermetic bond.

 

Ceramic Orifice Plate-Analytical Equipment Solutions

 

Compared with polymer-based solutions, ceramic orifice plates offer much better thermal resistance and mechanical strength. Another advantage is durability. Ceramic parts generally handle plasma exposure and cleaning chemicals much better than polymer-based materials. In real applications, this usually means less contamination inside the chamber and fewer maintenance issues after long-term operation. This makes ceramic-to-metal sealing technology more important than ever.

 

Innovacera provides customized ceramic orifice plate manufacturing and repair services for various mass spectrometer platforms. Our engineering team supports both standard and customized designs based on customer requirements. For geting quote, pls contact sales@innovacera.com.

Comments

Post a Comment

Popular posts from this blog

Ceramic Reflectors

By -
Image
Source: https://www.innovacera.com/news/ceramic-reflectors.html Our ceramic reflectors work particularly well in Ruby and Nd:YAG laser pumping chambers and can be a highly cost effective alternative to metal coated reflectors. They are also extensively used as reflectors in housings for high intensity lamps. Ceramic reflectors can be glazed both inside the cavity and the out surface using a highly reflective glaze that seals the ceramic against ingress of cooling fluids that may alter the refractive index, introduce impurities and reduce reflectance and efficiencies. Glaze can also act as filters and our yellow glazed reflectors have been used successfully in certain applications. The visible yellow colour is complementary to the spectral colours violet and indigo and effectively absorbs these wavelengths up to around 450 nm. Typical applications Ceramic Reflectors For Beauty and IPL Applications Ceramic Reflectors For Diode-pumped Solid-state Lasers Ceramic Reflectors For Lamp-pumped...
Read more
By -
Image
  The laser tubes usually used in CO2 laser machines are categorized into DC glass、RF metal tubes and ceramic tubes. But Metal-sealed lasers are the most proven technology on the market for high-performance CO2 lasers. Metal laser tubes are sealed metal chambers made of metal and ceramic. Metal is typically stainless steel or other durable alloys and ceramics are usually alumina; they are brazed to form a feedthrough of up to 1.0 x 10 -10 atm-cc/sec. The tube is filled with a specific mixture of gases in the ratio of 1:1:8, typically: Carbon Dioxide (CO2): Nitrogen (N2): Helium (He). The metal and ceramic laser tubes use a technique called “radio frequency” to stimulate the gases to produce the beam. Using RF has advantages over DC voltage, including lower energy consumption, better control of the engraving process, and longer life, resulting in a higher-quality laser beam output over a longer period of time. Metal and ceramic laser sources can be air-cooled or water-cooled, depend...
Read more

Magnesium-Stabilized Zirconia (MSZ) for Demanding Ultra-High Temperature Applications

By -
Image
  In the Zirconia ceramic family, there is a material that can endure the high temperature of 2200 degrees centigrade. We call it Magnesium Stabilized Zirconia ceramic. It is a refractory material. Although 95% of the composition is zirconium oxide, its performance is quite different from the white zirconia ceramic(Y2O3 partially stabilized zirconia ceramic).     From its appearance, it is yellow in color and with porosity. We have two kinds of magnesium-stabilized zirconia ceramic. One with low porosity its a density is ≤52g/cm3, one with high porosity its a density a little higher, 5.4-5.6g/m3. But their main composition is almost the same. They can be used in air, vacuum, or protective atmosphere environments. Following is the detail of the material data sheet.   Property Item Units MSZ-L MSZ-H Composition ZrO2 % ≥95 ≥95 Al2O3 % ≤0.2 ≤0.2 SiO2 % ≤0.4 ≤0.4 MgO % ≤2.9 ≤2.9 Fe2O3 % ≤0.1 ≤0.1 TiO2 % ≤0.1 ≤0.1 Physical Color Yellow Yellow Density g/cm3 ≤5.2 ≤5.4-5.6 Po...
Read more