TCT-117 Ceramic Glazed Laser Pump Cavity Reflector Reflective for YAG Pump Chambers

By -





Innovacera Ceramic laser reflectors are high reflectance cavities used in solid state and CO2 laser systems. It is made of high purity 99% porous alumina ceramic and sintered at high temperatures to achieve a controlled porosity. Ceramic reflectors can be glazed both inside the cavity and around the outer edges using a highly reflective glaze that seals the ceramic against ingress of cooling fluids that may alter the refractive index, introduce impurities and reduce reflectance and efficiencies. Glazes can also act as filters and our glazed reflectors have been used successfully in certain applications.

Prime Features
- Surfaces can be sealed and coated with a solarization-resistant glaze to give high bulk refectivity
- 97.8% reflectance efficiency at 600-1000nm
- Reflectance efficiency exceeds 96% across the wavelength range 500-1200nm (see curve)
- Controlled porosity, Good thermal conductivity, High electrical resistivity.

Part No.: BAB330(TCT117)
Dimension: Φ31.00xΦ12.00x117 mm

Physical Characteristics
- Color: White
- Density: 3.1Mg/m^3
- Porosity: 22%
- Flexural strength: 170Mpa
- Coefficient of thermal expansion:
7.9×10^-6--/С (200～500℃)
9×10^-6/С (200～1000℃)


Typical Applications:

> Pumping chambers for flash lamp and continuous wave lasers using media such as Nd:YAG lasers, Alexendrite — low to high power, single or multiple lamp designs used for welding, cutting, marking and in lasers.
> Layered and segmented pumping chambers for diode pumped lasers.

Comments

Post a Comment

Popular posts from this blog

Silicon Nitride Heater

By -
Image
Source: https://www.innovacera.com/news/silicon-nitride-ceramic-heater.html Silicon Nitride Heater has the properties of high-temperature resistance, rapid speed-up, high thermal conductivity, which makes it widely apply for parking heater, heating element for central heating system, spark sensor, etc. Silicon Nitride Heater Features: High-temperature resistance Excellent thermal conductivity Rapid heating-up speed and high working temperature Good startup performance at low temperature, can be start-up at -30℃ Wide applications: high-speed diesel, high-temperature ignition device, ignition for oil medium, gas, burner, Preheater, etc. Application Mold heater Packaging Machinery Tobacco equipment Industrial equipment heating Burner ignition system Petrochemical industry Various high-temperature ignition devices
Read more

What makes the ceramic heating element the core part of a Vaporizer?

By -
Image
Source: https://www.innovacera.com/news/ceramic-heater-coil-for-vaporizer.html Not every dry herb vaporizers are the same! Especially those used ceramic heating element. The ceramic heating element is a safety and healthiest option for dry herb vaporizers, so every vaper is preferred to choose those vaporizers that carry ceramic heating element. The proponents believe that the heating element is the core of the vaporizer and primarily dictates the experience of the taste. Let's more specific, when a vaper burns tobacco, marijuana, or hemp during traditional smoking to release the active component, whatever it's nicotine, CBD, or THC, they inhale the smoke. We all know that's not good for health. Rather than burning, Vaporizer heats the liquid, wax or even dry herb to release a vapour, and a vaper inhales the vapour without any damage to their lungs or throat. And why the ceramic heating element is becoming the core part of the vaporizer? It's mainly because: 1. Ceramic ...
Read more

Machinable Aluminum Nitride BAN

By -
Image
BAN combines  Aluminum Nitride with Boron Nitride , a hybrid machinable Aluminum Nitride ceramic with excellent thermal conductivity, high strength, and resistance to thermal shock. Innovacera provides BAN, and it has very similar properties to SHAPAL material. SHAPAL is a trademark of Tokuyama Corporation.   These ceramics are used in various industries, including electronics, semiconductor manufacturing, aerospace, automotive and medical. BAN ceramics have properties that make them suitable for applications such as  heat sinks , heater substrates, semiconductor processing components, and optical equipment.   Material Advantages : High mechanical strength. High thermal conductivity. Low thermal expansion. Low dielectric loss. Excellent electrical insulation. High corrosion resistance–non-wetted by molten metals. Excellent Machinabilit–BAN can be machined to high-precision complex shapes. It has excellent sealing ability to vacuum and hasn’t given off much gas. High-...
Read more