Alumina Ceramic Heating Element


Alumina Ceramic Spacer Ring Heating Element Specification:
> Voltage:95V
> Power: 45w
> Resistances: 34ohm - 42ohm
> Working temperature: 100°C

Ceramic heater technology benefits:
* A fraction of the energy consumption compared to conventional element heater
* Long-lasting (non-aging)
* Time to ignition 60~90 seconds
* Tested to 100,000 cycles
* Easy to install and retrofit
*100°C at steady-state temperature
* Impervious to oxidation and corrosion


Alumina Ceramic Heater Design Structure

Ceramic Heaters are manufactured by printing resistors on alumina sheets,being laminated and sintered into
one pieces.
* Types:
■ Rectangular alumina ceramic heating element
■ Round shape alumina ceramic heating element
■ Rod shape alumina ceramic heating element
■Tube shape alumina ceramic heating element

Thermal Properties for Alumina Heater
Item
Unit
Value
Vickers Hardness
Gpa
11.5
Flexural Strength
Mpa
300
Compressive Strength
Mpa
2000
Modulus of Elasticity
Gpa
300
Poisson's Ratio
---
0.22-0.23
Fracture Toughness
Mpam1/2
3.5-4.0
Thermal Conductivity
W/(m·k)
25
Thermal Expansion Coefficient
10-6/℃
6.5-7.5
Thermal Shock Resistance
△T℃
200
Maximum Use Temperature
1600
Dielectric Strength
KV/mm
>12
Dielectric Constant
εr
9-10
Dielectric Loss Angle (1MHz)
---
0.0002
Volume Resistivity
Ω.m
>1015
Specific Heat
J/(kg·k)
0.78x103

Not without reason, the high temperature heating elements pellet igniter is the reliable standard ignition system for pellet heating systems in Europe-hundreds of satisfied customers speak for themselves.

Comments

Popular posts from this blog

Silicon Nitride Heater

What makes the ceramic heating element the core part of a Vaporizer?

Machinable Aluminum Nitride BAN