Zirconia ceramic plunger rod

By -

Comments

Post a Comment

Popular posts from this blog

Ceramic Reflectors

By -
Image
Source: https://www.innovacera.com/news/ceramic-reflectors.html Our ceramic reflectors work particularly well in Ruby and Nd:YAG laser pumping chambers and can be a highly cost effective alternative to metal coated reflectors. They are also extensively used as reflectors in housings for high intensity lamps. Ceramic reflectors can be glazed both inside the cavity and the out surface using a highly reflective glaze that seals the ceramic against ingress of cooling fluids that may alter the refractive index, introduce impurities and reduce reflectance and efficiencies. Glaze can also act as filters and our yellow glazed reflectors have been used successfully in certain applications. The visible yellow colour is complementary to the spectral colours violet and indigo and effectively absorbs these wavelengths up to around 450 nm. Typical applications Ceramic Reflectors For Beauty and IPL Applications Ceramic Reflectors For Diode-pumped Solid-state Lasers Ceramic Reflectors For Lamp-pumped...
Read more
By -
Image
  The laser tubes usually used in CO2 laser machines are categorized into DC glass、RF metal tubes and ceramic tubes. But Metal-sealed lasers are the most proven technology on the market for high-performance CO2 lasers. Metal laser tubes are sealed metal chambers made of metal and ceramic. Metal is typically stainless steel or other durable alloys and ceramics are usually alumina; they are brazed to form a feedthrough of up to 1.0 x 10 -10 atm-cc/sec. The tube is filled with a specific mixture of gases in the ratio of 1:1:8, typically: Carbon Dioxide (CO2): Nitrogen (N2): Helium (He). The metal and ceramic laser tubes use a technique called “radio frequency” to stimulate the gases to produce the beam. Using RF has advantages over DC voltage, including lower energy consumption, better control of the engraving process, and longer life, resulting in a higher-quality laser beam output over a longer period of time. Metal and ceramic laser sources can be air-cooled or water-cooled, depend...
Read more

Characteristics And Common Application of Silicon Nitride Igniters

By -
Image
  Silicon nitride (Si3N4) ceramic   igniters have significant advantages over ceramic heaters, mainly reflected in their high temperature resistance, rapid heating ability and thermal stability, making them very popular in many high-temperature application scenarios. Today, we will mainly introduce the characteristics, common application scenarios, advantages and precautions of silicon nitride igniters.      1. Core characteristics  1) High temperature tolerance  2) Silicon nitride ceramic igniters can heat up to 1000-1400 ° C in a very short time (2-10 seconds), and can work stably in a high-temperature environment of 1200-1400 ° C for a long time. This feature makes it suitable for scenarios that require rapid start-up and maintenance of high-temperature uniform distribution, such as industrial kilns, burners, mold heating, etc.  3) Thermal surface stability  4) The heating element is encapsulated in a dense silicon nitride ceramic matrix ...
Read more