INNOVACERA® Hot Press Boron Nitride Rod Ø 13 x 1 mm

By -
From: https://store.innovacera.com/product/boron-nitride-rod-diameter-13mm/

Retail  INNOVACERA® Hot Press Boron Nitride Rod Ø 13 x 1 mm, on sale now, just $120 & free shipping, custom length is available. White in color.

Hexagonal Boron Nitride has a microstructure similar to that of Graphite. In both materials this structure, made up of layers of tiny platelets, is responsible for excellent machinability and low-friction properties. we called hexagonal boron nitride (HBN) or white graphite.


Comments

Post a Comment

Popular posts from this blog

Ceramic Reflectors

By -
Image
Source: https://www.innovacera.com/news/ceramic-reflectors.html Our ceramic reflectors work particularly well in Ruby and Nd:YAG laser pumping chambers and can be a highly cost effective alternative to metal coated reflectors. They are also extensively used as reflectors in housings for high intensity lamps. Ceramic reflectors can be glazed both inside the cavity and the out surface using a highly reflective glaze that seals the ceramic against ingress of cooling fluids that may alter the refractive index, introduce impurities and reduce reflectance and efficiencies. Glaze can also act as filters and our yellow glazed reflectors have been used successfully in certain applications. The visible yellow colour is complementary to the spectral colours violet and indigo and effectively absorbs these wavelengths up to around 450 nm. Typical applications Ceramic Reflectors For Beauty and IPL Applications Ceramic Reflectors For Diode-pumped Solid-state Lasers Ceramic Reflectors For Lamp-pumped...
Read more
By -
Image
  The laser tubes usually used in CO2 laser machines are categorized into DC glass、RF metal tubes and ceramic tubes. But Metal-sealed lasers are the most proven technology on the market for high-performance CO2 lasers. Metal laser tubes are sealed metal chambers made of metal and ceramic. Metal is typically stainless steel or other durable alloys and ceramics are usually alumina; they are brazed to form a feedthrough of up to 1.0 x 10 -10 atm-cc/sec. The tube is filled with a specific mixture of gases in the ratio of 1:1:8, typically: Carbon Dioxide (CO2): Nitrogen (N2): Helium (He). The metal and ceramic laser tubes use a technique called “radio frequency” to stimulate the gases to produce the beam. Using RF has advantages over DC voltage, including lower energy consumption, better control of the engraving process, and longer life, resulting in a higher-quality laser beam output over a longer period of time. Metal and ceramic laser sources can be air-cooled or water-cooled, depend...
Read more

Why Metal And Ceramic CO2 Laser Tubes Are The Most Chosen For High-Performance CO2 Lasers

By -
Image
  The laser tubes usually used in CO2 laser machines are categorized into DC glass、RF metal tubes and ceramic tubes.But Metal-sealed lasers are the most proven technology on the market for high-performance CO2 lasers. Metal laser tubes are sealed metal chambers made of metal and ceramic, metal is typically stainless steel or other durable alloys and ceramics are usually alumina, they are brazed to form a feedthrough of up to 1.0 x 10 -10 atm-cc/sec. The tube is filled with a specific mixture of gasses in the ratio of 1:1:8, typically:–Carbon Dioxide (CO2): Nitrogen (N2): Helium (He). The metal and ceramic laser tubes use a technique called “radio frequency” to stimulate the gasses to produce the beam. Using RF has advantages over DC voltage, including lower energy consumption, better control of the engraving process, and longer life, resulting in a higher-quality laser beam output over a longer period of time. Metal and ceramic laser sources can be air-cooled or water-cooled, depe...
Read more