INNOVACERA | technical ceramic solutions

  Silicon nitride ceramic glow plugs  are used for diesel engine start-up preheating and ignition of various high-temperature gases. This product uses silicon nitride ceramics as the base material of the heating part, which overcomes the problems of metal sleeve-type glow plugs, such as not resistant to high temperatures, short service life, and long pre-heating time . The following is the detailed information of our products:   Electrical properties *Rated Voltage：8V，12V，16V，18V，24V *Frequency：50/60HZ *Rated power：35W～750W   Advantages   Long service life: Service life reaches 15000 hours; Power on and off times: 105 times; Fast preheating: when the preheating temperature reaches 1000°C, the preheating time is 3-5 seconds; Good low temperature startup performance: reliable startup at -30°C; High temperature strength:suitable for high-speed diesel engines and high- temperature ignition devices.   Applications ： High speed diesel engine High temper...

  A pellet stove igniter is a very important component in pellet stoves, which are widely used for heating  pellet burners, pellet stove, pellet boiler, gas heating systems and so on.Generally,   pellet igniter   is responsible for initiating the combustion process by igniting the wood pellets. Different voltages are used in different power systems. Typically, you can find pellet stove igniters designed for either 120V or 230V power systems. The voltage requirement should be specified by the manufacturer for the particular igniter model. Alumina Ceramic Heater A  120V pellet stove igniter  is designed to operate with a standard 120-volt electrical supply commonly found in North America. On the other hand, a 230V pellet stove igniter is designed for use with a 230-volt electrical supply, which is more commonly used in European countries and other parts of the world. It is essential to match the voltage requirement of the pellet boiler ign...